Support read write Frequency: 125KHz, 250KHz, 500KHz, 375KHz,625khz, 750kHz, 875KHz, 1000KHZ, 13.56MHz(ISO1443A/B),125kHz
Prox cards. Support read:EM4100/EM4200,Mifare classic,UID cards,Ultralight,Ntag203,1386/1326/1346;
Support cards write: 1386/1326/1346,T5577,EM4305,Mifare UID cards.
It can crack the encryption card. 10 frequency copy encrypted NFC smart card RFID copier ID/IC reader writer.
Comes decoding, direct preparation of various types of smart card access door.
Can replicate these frequencies of the ID card: 125 KHz, 250 KHz, 500 KHz, 375 KHz, 750 KHz, 875 KHz, l000 KHZ.
IC card: 13.56 MHz. Digital key input number can be directly input. ID/IC full hand, voice broadcast.
Powered by 4 AAA batteries(not included),Also can use USB cable power supply.
HD 3.2 inch full color screen, with clear display.
How to Crack encryption 13.56Mhz cards: Please read it carefully and follow the steps as below:
1.When the 13.56mhz cards have encrypted,it should be using the software to crack the cards.
2.Conneted with copier with computer via USB cable,
3.then Press the “on/off” button,
4.then the copier will be show the “Disclaimer”page,
5.NOT press any button on the Copier,
6.then your computer will show a removeable disk,
7.open the disk,
8.there are the manual and the software,
9.Press the button “OK” to agree with the Disclaimer on the computer fistly,
10.then argee with the copier’s “Disclaimer”page,
11.that’s will be connect successfully,
12.put your original cards on the back side of the Read/Write area,
13.then press the button “scan”to crack the passwords,
14.after 2 or 5 minutes,the passwords will be cracked successfully,
15.then put one UID cards in the read/write area,
17.that will be ok.
How to copy the 125khz RFID cards:
1.Press the “on/off “button,